Taking the right steps is crucial for an iPhone if it gets water-damaged. Unfortunately, there’s a lot of misguided information available online about what works when dealing with a water-damaged phone. The following steps can help you to rescue your water damaged iPhone:
Step #1: Remove the Water form the Outside of Your Phone
Try to remove the water while holding your iPhone horizontally, and make sure that the screen points at the floor. Now, use the microfiber or other absorbent cloth to wipe away the water from the outside of your phone. Please, do not use a tissue or a cotton swab, as it can leave the dust or residue inside your phone.
Step #2: Remove the SIM (Subscriber Identification Module) Card
Remove your SIM card immediately if your iPhone gets exposed to water. It can save your SIM card, and it will also prevent the air from entering your phone. The SIM card typically survives spills unless it gets exposed to liquid for a long time. A gentle breeze with a fan can aid you with the evaporation process for your SIM card. Do not use a blow dryer or any other fans that blow hot air.
Step #3: Put Your iPhone on a Flat Surface in a Dry Location
Now lay your iPhone face downcast on a flat surface, such as the kitchen counter or table. Choose a location that has low humidity. Don’t put your iPhone in the container or a bag; if you do that, it can cause the water to fall onto other internal components.
Step #4: Set the Drying Agents on the Top of Your iPhone
If you have commercial drying agents available, then set them on the topmost of and around your phone. Do not use rice. Rice is not an effective drying agent. You may be thinking: What is a desiccant (drying agent)? It is a substance that produces a state of dryness in other objects.
Step #5: Wait for Some Time for the Water to Evaporate
Once you follow the preceding steps, then put it down and walk away from it so that the water can evaporate. Many scientific studies have inferred that exposing water-damaged electronic appliances to open air can be a very effective remedy. We suggest you wait for 24 hours before you turn your iPhone back on.
Step #6: Effort Turning Your iPhone Back On
Place your iPhone on a horizontal surface, plug it into power, and wait for it to turn back on. If you have waited for 24 hours, then it can run out of battery, so try to turn it on after some minutes of charging.
Step #7: Back up Your iPhone If Possible
If your phone turns back on, then save your data using iCloud or iTunes. Why? As water-damaged phones can sometimes spoil your data.
Extra Steps: Depending on the Situation
You may have dropped your iPhone in the toilet, sink, or bathtub. If you have dropped it in a toilet, make sure you wear latex gloves while handling your iPhone. If you have dropped your phone in the sink where soap is there. Then scrape the iPhone using an anti-static brush or a brand new toothbrush. Moreover, if you have dropped your iPhone in the bathtub, rinse your iPhone exposed to shower products utilizing tap water.
In a Nutshell…
If your iPhone gets water damaged, then lay it down on a flat surface in a dry location. Eradicate its SIM card. Hold the iPhone horizontally without shaking it. Use commercial desiccants if possible, and do not use rice. Wait at most for 24 hours so that the water evaporates, and you can turn your iPhone back on. If you continue to have issues with your iPhone, contact us at Cellfixx in Vancouver, and we'll get your phone working like new again.